3 M Auxilary cable

Alarm unit for high/low battery voltage (FN Electro) excl. soundalarm. 12/24V DC

Output buffer 12 outputs

15 inch radar monitor colour Neovo TFT LCD with glass front, 220 VAC or 12VDC

17 inch radar monitor colour Neovo TFT LCD with glass front, 220 VAC or 12VDC

19 inch radar monitor colour Neovo TFT LCD with glass front, 220 VAC or 12VDC

Comnav colour navigator G2 Display for compass
Incl. 25' cable and DU-2 distribution unit

Remote steering tiller

203 remote control with LCD display for Comnav Autopilots Commander & Admiral, with 40' cable

Magnetic compass incl. cable for P-series Autopilot

Fluxgate Compass incl. 5 meter cable and connector

Rudder angle indicator (12 to 32 VDC)

Rectifier unit - 110/220VAC

Ethernet cable - 20 meter is standard length (Price per meter)

Watertight Ethernet cable - 20 meter is standard length (Price per meter)

Radar cable - 20 meter is standard length (Price per meter)

14 core composite cable (60m)

16 cores composite cable for Inter Switching Unit 10 meter cable

14 core radar installation cable for NQE-3167 (Price per meter)

8pin J1 plug for FF-60

MMSI number programming when purchase of new EPIRB

Programming of private channels

Transducer B45, 600W, true hull, bronze incl. 10 meter cable

Transducer P58, 600W, transom, plastic

Transducer B319, 600W, true hull, plastic

Transducer B60-20, 600W, true hull, bronze

Mini keyboard

HUB (incl. mount kit)

UT-200ND20A 200KHz transducer element only, incl 20 meter cable for tank type NKF-341

UT-50MD-20 50KHz transducer element only, incl 20 meter cable for tank type NKF-345

Facsimile paper for NKG-800

Ink rippon (SP-16051) for NKG-800

J3 GPS NMEA connector for GPS input

J4 VGA connector for direct connection of slave monitor

CFT-022 transducer element incl. 30 meter cable for NKF-547/530E

CFT-023 gate valve transducer incl. 25 meter cable for NKF-531E

External speaker

Printerpaper 112 mm width x 25 m, packed in sets of 5 rolls (price per roll)

Recording paper JAX-9A/B (price per roll)

Recording paper JAX-91 (price per roll)

Spare antenna

Flush mount bracket for display unit

Stand for display unit

Printer

PCMCIA memory card 2 Gb

External speaker microphone

Battery pack

Connector for printer

RGB unit

1,5 meter DTE Signal cable (DTE to IME) TBA

2 meter DTE Power cable (DTE to EXT PSU) TBA

1.5 meter printer signal cable (printer to DTE) TBA

2 meter printer power cable (printer to DTE) TBA

IME-JB extension cable (2 meter)

Adapter cable JUE-250 (2 required for use of 50 meter cable)

Printerpaper 57mm x 25m; price pr. roll. Packed in sets of 5 rolls.

Instruction Manual 

Instruction Manual (sensor) for JLR-8400

Instruction Manual (sensor) for JLR-8600

Instruction Manual for JLR-8600

External buzzer connection kit

10 meter printer cable

Spare parts

Spare parts

Spare parts

Frame grabber board

Rack mount for NBD-2150

Rack mount for NBB-724

NBDP (Radio Telex) Kit

PC interface kit (for 7ZZNA4017 and/or Remote Maintenance). PC or laptop must be equipped with Windows XP or lower.

FAX image display kit (for output to external PC)

LRIT upgrade JUE-75C (CN114 version)
Please contact NAVTEAM for update version

LRIT upgrade JUE-85
Please contact NAVTEAM for update version

Gyro cable (per meter)

LAN modular cover (10 pcs)

LAN connector (10 pcs)

Antenna Angle Bracket Mount (1" to 2.5" tube)

Antenna Pole Mount (1.5" tube) 

1850 mAh Li-Ion spare battery pack

Trunkpipe (PVC)

Trunkpipe (FRP)

Flush mount kit

Table mount kit

Flush mount kit

Table mount kit

Flush-mount adaptor for JFE-680 designed console (JFE-700)

Interface for operational performance test

Reset unit with visual alarm (for flush mounting)

Alarm unit with visual and audio alarm (for flush mounting)

Selector unit (for flush mounting)

Motion sensor 12V DC (up to 10 meter range)

Wall mounting box for BW-800 (H188 x W188 x D106 mm)

Foundation small for reset unit (801)

Foundation large for alarm unit (802)

Foundation large for selector unit (803)

Reset unit with audio alarm for bridge wing IP56 (wall mounting)

Reset unit for bridge wing IP56 (wall mounting)

10 M cable Multi 8-pin Simple-cut

30 M cable Multi 8-pin Simple-cut

LOG installation cable, double shielded (price per meter)

Radar video cable, multi core (price per meter)

Video buffer unit

Emergency light MF/HF 12V DC

Analogue signal converter (8 ports)
Build in NCT-72 or NCT-63

50 meter ADE/BDE coaxial cable (connectors both ends)

Pigtail for 2nd display option (incl. CFQ-6560)

Serial data cable (3 meter)

Serial data cable (15 meter)

Dry contact cable (3 meter)

Dry contact cable (15 meter)

Power cable 

Cable for connection of JLR-20/21/30/31

Ethernet cable straight (5 meter) / FTP

Ethernet cable cross (5 meter) / FTP

5 meter scanner cable w/connectors

10 meter scanner cable w/connectors

15 meter scanner cable w/connectors

20 meter scanner cable w/connectors

30 meter scanner cable w/connectors

External monitor outpyt cable

Data power cable for JLR-8400

Data/power cable (20 meter) with 1A fuse in holder/data/power/contact

Data cable (3 m) for connecting external sensor

3 meter data cable (6 to 14-core data cable for daisy chain - power distribution)

30 meter EME/IME cable with connectors in both ends

40 meter EME/IME cable with connectors in both ends

50 meter EME/IME cable with connectors in both ends

Data cable (20 meter)

Multi NMEA cable (10 meter incl. connectors)

15 meter scanner cable, w/connectors

20 meter scanner cable, w/connectors

30 meter scanner cable, w/connectors (only possible if 24V DC connected)

40 meter scanner cable, w/connectors

5 meter scanner cable, w/connectors

50 meter scanner cable, w/connectors

65 meter scanner cable, w/connectors

Cable for connection of JLR-10

10 meter keyboard extension cable (max. 2)

Data cable (10 meter)

20 meter antenna extension cable incl. connectors

Beacon connection cable

Y cable for 2nd station keyboard

Display cable for JLR-8600

Antenna extension cable - 15 meter incl. connectors

External VGA cable

Data cable 3 meter incl. connectors

Receiver extension cable (15 meter)

Receiver extension cable (5 meter)

0.3 meter pilot plug cable

10 meter scanner cable with connectors

15 meter scanner cable with connectors

20 meter scanner cable with connectors

30 meter scanner cable with connectors

5 meter scanner cable with connectors

Power/Data cable (1,2 meter)

240 kHz transducer element incl. 25 meter cable

Transducer 200KHz/50KHz dual freq.- thru-hull (B)

Triducer 200KHz/50KHz dual freq. - thru hull (B)

Triducer 200KHz/50KHz dual freq. - transom (P)

TCS Buzzer

External buzzer

Neck Heater Kit (for S-band radar)

Neck Heater Kit (for 25 kW X-band radar)

NSK interface unit

AIS Interface TBA

Gyro converter PCB (built-in JHS-182 connection box)

Interconnection cable for display standalone type 

Interconnection cable for display desktop type 

10 M Coaxial cable 

25 M Coaxial cable 

50 M Coaxial cable 

Control Unit Flush Mount  

Junction box

VDR connection kit

NMEA output terminal

Trigger input terminal

NAV-IN Terminal

Remote controller terminal

Junction Board (extension board for 2 wire analogue telephones, external buzzer, input of GPS signal, and more)

Extension board for 2nd display

Extention board
NQD-2770 is required

Standalone console for 19-inch display

Standalone console for 26-inch display

Tray

VHF whip antenna, heavy duty incl. mounting nut N240F

Playback software

Real time monitor

Printer deskmount

up to 6 months of recording time

External speaker

User interface computer

SonaSoft^TM thin client with license

USB dongle for C-MAP chart support option

Repeater, type NT920AHR, 120 mm dia dial, bracket or panel mounting c/w 1m cable

Junction box, type GS506, 8 way c/w glands

48 hrs of recording capacity 

Relay Box

Bell with Lamp

NMEA system comprising sensor c/w cable & plug, GS720 NMEA unit with panel mount kit

Replacement Azimuth Circle / Mirror c/w shadow pins in wood box

Storage box, wood, for spare compass

Replacement Compass, Lilley & Gillie 'SR4', Reflector

GPS change over switch, manual operation

External speaker microphone (waterproof type)

Headset for SPT incl. 2 meter cable with connector

Junction box for SPT system, 12 pairs

Junction box for SPT system, 6 pairs

Activation Fee for SIM Card

Iridium active antenna incl. power control box, mounting and 40 meter cable

Iridium heavy duty antenna for N-connector incl. mounting

Iridium PABX 30 meter cable kit for connection to vessels internal telephone exchange incl. connectors 2 pcs. RJ-11.

Iridium GoChat Virtual Crew Calling Cards, Each. Please note that ordered quantity MUST be divisable by 100 pcs.

Iridium GoChat Virtual Crew Calling Cards, 45 minutes each. Please note that ordered quantity MUST be divisable by 100 pcs.

Iridium GoChat Virtual Crew Calling Cards, Each. Please note that ordered quantity MUST be divisable by 100 pcs.

Iridium Antenna cable ½" 20 meter cable kit, incl. 2 pcs N-connectors

Iridium Antenna cable ½" 30 meter cable kit, incl. 2 pcs N-connectors

SIM card incl. PIN & PUK codes for Iridium telephone

Junction box 

Matching Box (for 200 kHz)

Matching Box (for 50 kHz)

JRC Transducer unit (200 kHz) incl. metal tank and 20 meter cable

JRC Transducer unit (50 kHz) incl. metal tank and 20 meter cable

Digital remote display unit NWW-58, LCD display, incl. mounting bracket. 12 VDC

GPS sensor unit

Junction box for NAW-60

NMEA heading output converter
Sin/Cos convertor unit (Danish made)

4,8 meter antenna, 2-sections with connection transformer box for receiving. Excl. mounting brackets

3-section 1200W antenna for mast mounting incl. connection box

Horizontal bracket

Tilting bracket

Horizontal stand

Shading Circle

Repeater cover

Sail cloth for horizontal stand

Spare parts for KR101A / KR181A - MUST be ordered when ordering MKR101A / MKR181A

Various models available on request

Pole mount for LT-1000

Roof mount for LT-1000

Pole mount for LT-300

Roof mount for LT-300

Flush Mount Control unit LT3100S

Flush Mount Control unit LT3100S

Interface Unit for LT-3100S GMDSS

Alarm panel for LT-3100S GMDSS

Printer Adapter for LT-3100S GMDSS

Power Supply Unit, 220 VAC - 24 V DC, 10 Amp. (FN Elektro)

Power Supply Unit, 110 VAC / 220 VAC - 24 V DC, 10 Amp. (FN Elektro)

200kHz Transducer Tank

50 kHz Transducer Tank

Serial distribution unit with 12 outputs

96 x 96 mm digital display for flush mount

124 x 124 mm digital display for flush mount

180 x 180 mm digital display for wall mount

96 x 96 mm assist monitor for desk top mount

170 x 170 mm digital display for flush mount

192 x 192 mm digital display for flush mount

D/S interface

Dimmer box for analogue ROT (MKR302) and digital display (MHR110)

Junction box for CMZ900B C. operation unit

Junction box for repeater compass

AC adapter

AC annunciater

C. Operation unit as CMZ900B system option

Additional cost to MKR040 for automatic change over function as CMZ900D system option

Repeater compass

Steering Repeater, 192 x 192 mm with 3 meter cable

Single channel course recorder for flush mount

Single channel course recorder for wall mount

Dual channels course recorder for flush mount

Dual channels course recorder for wall mount

Analogue ROT, separate dimmer

Azimuth circle

Bluetooth wireless earpiece with 12'' cable and charger

IMPRES Li-ion 2350 mAh battery, IP57 (Factory Mutual (FM) approved)

Wireless push-to-talk button

1800mAh Li lon rechargeable battery

Adjustable nylon carrying strap

Nylon case with 3 inch swivel belt loop

Hard leather case with 2.5 inch swivel belt loop

Hard leather case with 3 inch fixed belt loop

6 unit multi charger incl. power supply (Euro)

Swivel carry holder

Single-wire surveillance earpiece with translucent tube, in-line microphone and PTT

Swivel earpiece with in-line microphone and PTT

Nylon wrist strap

Hard leather case with 2.5 inch swivel belt loop

ATEX hard leather case with 2.5 inch swivel belt loop

Soft leather bag with 2.5 inch swivel belt loop

ATEX soft leather bag with 2.5 inch swivel belt loop

Peltor ATEX PTT (push to talk) adapter

OPERATIONAL CRITICAL WIRELESS EARPIECE PTT

Leather Case, 3 inch Swivel Belt Loop - R7 w/Display

Leather Case, 3 inch Swivel Belt Loop - R7 Non Display Model

2-Wire Surveillance Kit with Loud Audio Translucent Tube, IMPRES

Remote speaker microphone, submersible (IP57)

IMPRES Windporting Remote Speaker Microphone (ATEX) with volume control and emergency button.

Windporting Remote Speaker Microphone, submersible (IP57)

IMPRES active noise cancelling remote speaker microphone (ATEX) with volume control. 

WM500 WIRELESS PoC REMOTE SPEAKER MICROPHONE

NiMH 1300 mAh battery

1800 mAh Li-Ion battery

IMPRES Li-ion 1500 mAh

R7 Series 2200mAh IMPRES Lithium Slim Battery IP68

IMPRES Li-ion 2150 mAh high capacity battery (IP57)

NiMH 1300 mAh battery

1400 mAh Li-Ion battery

R7 Series 2200mAh IMPRES Lithium Slim Battery IP68

R7 Series 2450mAh IMPRES Lithium Battery IP68

R7 Series 2850mAh IMPRES Lithium Battery IP68

R7 Series 3200mAh IMPRES Lithium Battery TIA4950 IP68

Micro USB single-unit plug-in charger incl. 100-240V AC power supply

Impres 6-Way Intelligent Multi-Unit Charger

IMPRES Single-Unit charger incl. 230V AC Power supply EU plug type

IMPRES 6 unit multi charger incl. 230V AC power supply

IMPRES 6 unit multi charger incl. 230V AC power supply with display

IMPRES single-unit charger incl. 230V AC power supply

Pole mounting kit for NQE-7700A

Flush mount kit for display unit

Full adjustable and ergonomical display bracket for NWZ-170-E

Full adjustable and ergonomical display bracket for NWZ-173-E

Flush mount kit

Wall mounting bracket for NKG-91

Pilot plug flush mount bracket (for NQE-3150)

Pedestal for standalone installation

Display mounting bracket for NWZ-164

Transducer replacement kit incl. joint sheet, paking, spacer, gland, plate and bolts

Mounting kit for NNN-20

U-type desk mount kit

Performance Monitor Bracket (IMO)

Performance Monitor Bracket (IMO)

Stuffing tube

Display hood

Display hood

Sun visor for NWZ-164

Carrying case

Display cover

Display cover

Flush mount kit for keyboard

Rack for mini keyboard

Leather case

Carrying leather case

Radar overlay kit. High resolution radar image when interfaced with JRC radars. Brilliance and clutter controls of the radar images continues to be operable.

SRB expansion kit (15 serial ports).

Analog Option Board (AOB) expansion kit (10 analog ports).

Gyro interface unit

Gyro change over box

Gyro change over cam switch

Clamp for side mast mounting - 30-50 mm galvanized metal.
2 pcs needed for 1 antenna

Clamp for side mast mounting - galvanized metal.
2 pcs needed for 1 antenna

"No Break" Power Supply
Input: 110 or 220 V AC / output: 24 V DC
Auto change over if AC fails

Power supply for NAVTEX active antenna

Heavy duty antenna mounting (solid brass)

Universal antenna mast mount (anodized)

Active antenna (requires N267F power supply)

Self supporting antenna

Self supporting antenna

Active antenna incl. pole mounting kit

Whip Antenna (6 meter)

Radiator 4'

Radiator 6'

Radiator 6'

Radiator 9'

AC power supply (150W)

Battery charger

Power Supply Unit, 220 VAC - 24 V DC

AC rectifier

Ni-Cd spare battery

Lithium battery (required for GMDSS)

JRC battery charger 10A

JRC battery charger 22A

JRC type power supply
220V AC to 24V DC, 30A

JRC AC/DC Power supply Input 110 / 220V AC
Output 24V DC

Power supply unit

Power supply 100V-220V AC (-/+ 10 %)

Power Supply Unit, 220 VAC - 24 V DC

JRC AC/DC Power supply Input 90-264VAC, output 24 VDC

Power supply

DC Convertor (24 VDC to 12-24 & 6.5 VDC)

AC Rectifier (AC 100/220 to 12-24 & 6.5 VDC)

ARPA unit (10 targets)

ATA board, 30 targets (IMO)

ARPA unit (100 targets)

Warning Lamp Unit

LED Warning Lamp

2nd station radar control keyboard unit with track ball.
Incl. 5 meter cable and connector.

External buzzer

Trackball

Keyboard

Buzzer box (max 4 pcs with 1 SAT-C system)

Extra radar control panel, incl. 5 meter cable w/connector

2nd station radar control keyboard unit with track ball
Incl. 5 meter cable w/connector

Operation panel unit

Distress message controller

Remote controller

Reset button unit

Water proof reset button unit

Emergency call button unit

Reset button

Waterproof Reset button

Remote Controller (excl. Handset)
CQD-7701 is required

Channel selector for bridge wing

MF/HF controller (one additional controller available)

Dimmer 

Control unit NCM-928 for MFD consist of:

• Processor
• trackball
• Power supply
• Instruction manual (digital)

Control unit NCM-928E for MFD consist of:

• Processor
• trackball
• Power supply

Control unit, consisting of

• NCD-1678 Processor
• NCE-5794 keyboard
• CFQ-5436-5 Power cable

Stand Alone Universal Gyro / Log converter

NSK unit PCB (universal gyro/log interface)

Gyro converter PCB. Required in case only step/synchro signal available from Gyro.

Gyro Converter PCB (built-in) / NSK unit Universal Gyro/log interface

Alarm closure contact interface (16 ports)

Alarm closure contact interface (64 ports)

Installation base

Radio rack

Automatic GPS change over switch

GPS change over switch (manual operation)

Plotter unit (built-in) - Incl. card reader and world background chart

Processor

Processor S-version

Processor

Processor unit for JLR-8600

Keyboard for remote DTE TBA

Fixed capsule

Float free capsule

Recording control unit 

Remote DTE TBA